Bienvenue, Invité
Nom d'utilisateur : Mot de passe : Se souvenir de moi
  • Page :
  • 1
  • 2

SUJET : Is there a leakage?

Is there a leakage? il y a 3 mois 4 semaines #1

  • ziyametedemircan
  • Portrait de ziyametedemircan
  • Hors Ligne
  • Senior Member
  • Messages : 78
  • Remerciements reçus 21
Try the attached soundfont.
There should be no sound with these settings.

Note: This is a relatively moderate test.
The organ sounds I'm working on have some sounds you can't turn off.

Ce message contient un fichier en pièce jointe.
Veuillez vous connecter ou vous enregistrer pour le consulter.

L'administrateur a désactivé l'accès en écriture pour le public.

Is there a leakage? il y a 3 mois 4 semaines #2

  • S. Christian Collins
  • Portrait de S. Christian Collins
  • Hors Ligne
  • Senior Member
  • Messages : 60
  • Remerciements reçus 23
Due to a quirk in the SoundFont specification (or at least how it was implemented by E-MU/Creative), 1 dB in the attenuation field only attenuates the sound by 0.4 dB. So, your 144 dB attenuation is only attenuating by 57.6 dB, which is why you still hear sound.
L'administrateur a désactivé l'accès en écriture pour le public.

Is there a leakage? il y a 3 mois 4 semaines #3

  • S. Christian Collins
  • Portrait de S. Christian Collins
  • Hors Ligne
  • Senior Member
  • Messages : 60
  • Remerciements reçus 23
Also, if you're looking to not hear certain zones while editing, you can right-click the zone title in the table view and choose "mute", "activate solo", or "unmute all".

... hmmm, I just noticed that "unmute all" is broken. I will file a bug report about that.
L'administrateur a désactivé l'accès en écriture pour le public.

Is there a leakage? il y a 3 mois 3 semaines #4

  • ziyametedemircan
  • Portrait de ziyametedemircan
  • Hors Ligne
  • Senior Member
  • Messages : 78
  • Remerciements reçus 21
Inst 144 = 57.6
Perf 144 = 57.6
57.6 + 57.6 = 115.2 Is this still normal?
Can anyone hear -115.2dB ?
L'administrateur a désactivé l'accès en écriture pour le public.

Is there a leakage? il y a 3 mois 3 semaines #5

  • S. Christian Collins
  • Portrait de S. Christian Collins
  • Hors Ligne
  • Senior Member
  • Messages : 60
  • Remerciements reçus 23
I did not notice you had 144 dB set at both instrument and preset level. This should be inaudible, and when loaded into FluidSynth, it is.
L'administrateur a désactivé l'accès en écriture pour le public.

Is there a leakage? il y a 3 mois 1 semaine #6

  • Davy
  • Portrait de Davy
  • Hors Ligne
  • Administrator
  • Organ enthusiast and creator of Polyphone
  • Messages : 340
  • Remerciements reçus 81
Each parameter has a range. In the case of the attenuation this is between 0 and 144 and there is no way to go outside this (written in the specs). So even if you specify 144 at the instrument level and 144 at the preset level, since 288 it is above 144 it will be back to 144.

As you noticed, the dB are not real dB but for compatibility with all other soundfonts Polyphone also includes this error.
L'administrateur a désactivé l'accès en écriture pour le public.
  • Page :
  • 1
  • 2
Temps de génération de la page : 0.160 secondes