Welcome, Guest
Username: Password: Remember me

TOPIC: Noob Question On Tuning

Noob Question On Tuning 2 weeks 5 days ago #1

  • Paul furze
  • Paul furze's Avatar
  • Offline
  • New Member
  • Posts: 2
Hi All,
Apologies up front if this has been asked before.

This is about tuning a sample and an instrument.
I have a sample that in sample view shows 60C. But the little cents indicator is to the right saying 30.
Now if i understand correctly that means the sample is 30cents above 60C.

Knowing this when I create an instrument that uses this sample what values should I put in the tuning (cents) table?
Is it -30 ?

Additionally, most of the tutorials on soundfonts dont explain this well, and often dont even put a cents tuning figure in.
I can only assume that there samples are bang on. Unless I'm not getting something ?

thanks,
Paul
The administrator has disabled public write access.

Noob Question On Tuning 2 weeks 5 days ago #2

  • bottrop
  • bottrop's Avatar
  • Offline
  • Elite Member
  • Posts: 185
  • Thank you received: 31
follow the indicator, +3=+3, -3=-3.
you can check by placing the sample twice in your Instrument,
one with its Root key and +30 cents
and the other sample with the Root key + 1 semitone minus 70 cents
tegards bottrop
The administrator has disabled public write access.

Noob Question On Tuning 2 weeks 5 days ago #3

  • Paul furze
  • Paul furze's Avatar
  • Offline
  • New Member
  • Posts: 2
Thank you for quick response.
The administrator has disabled public write access.
Time to create page: 0.063 seconds