Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1
  • 2

TOPIC: Make sample behave the same no matter pedal on/off

Make sample behave the same no matter pedal on/off 4 months 1 week ago #2

  • bottrop
  • bottrop's Avatar
  • Offline
  • Elite Member
  • Posts: 201
  • Thank you received: 37
yes, this feature is already implemented in the software, but only for Senior Members. after a few years of good behaviour you will be automatically invited to upgrade (free)
regards bottrop
The administrator has disabled public write access.
The following user(s) said Thank You: batata004

Make sample behave the same no matter pedal on/off 4 months 1 week ago #3

  • batata004
  • batata004's Avatar
  • Offline
  • Junior Member
  • Posts: 20
  • Thank you received: 1
So I hope I am having a good behaviour to be invited in the years to come to install the upgrade :)
The administrator has disabled public write access.

Make sample behave the same no matter pedal on/off 4 months 1 week ago #4

  • ziyametedemircan
  • ziyametedemircan's Avatar
  • Offline
  • Elite Member
  • Posts: 175
  • Thank you received: 60
2x2=4
(1+1)x(1+1)=4
(3-1)x(6-4)=4
That is: Asking the same question in different ways does not affect the answer.
The administrator has disabled public write access.

Make sample behave the same no matter pedal on/off 4 months 1 week ago #5

  • batata004
  • batata004's Avatar
  • Offline
  • Junior Member
  • Posts: 20
  • Thank you received: 1
Sorry but I think you are making a big confusion. I never ever asked a question like this before.
The administrator has disabled public write access.

Make sample behave the same no matter pedal on/off 4 months 1 week ago #6

  • ziyametedemircan
  • ziyametedemircan's Avatar
  • Offline
  • Elite Member
  • Posts: 175
  • Thank you received: 60
Yes, you are right.
You didn't ask the same question. But the answer was given in the question you asked earlier.

www.polyphone-soundfonts.com/forum/suppo...-sample?start=6#2288

And the answer to that question will be almost the same as the answer to this question. (I'm not trying to bring you down)

As I mentioned in the previous message: As long as the sustain pedal is pressed, any key pressed during this period will not enter the release (note-off) phase.

Somehow, you have to adjust your piano touch style and pedal usage according to the pad delay.

I remembered an old experience: The old D-50 had a preset like "Piano+Pad" and it took some practice and getting used to it. There were even 4 sliders and you could decrease or increase the 4 layers combined with them, but I couldn't do that as I realized that I needed a third hand to do this while I had both hands on the keyboard.

I don't know if this can be controlled in some way or if a solution can be created with another approach.
I'll do some trial work for you today and tomorrow. I'll include a notification of success or failure here.
The administrator has disabled public write access.
The following user(s) said Thank You: batata004

Make sample behave the same no matter pedal on/off 4 months 1 week ago #7

  • batata004
  • batata004's Avatar
  • Offline
  • Junior Member
  • Posts: 20
  • Thank you received: 1
Now I understood what you meant! Thank you so much, so it looks like there is nothing that I can do to solve this.

I also appreciate your 2 last paragraphs, because I am really struggling with PIANO + PAD. So far, the best alternative I got is this: FROM key 0 to 60 I make the piano and the pad active everytime, FROM key 61 to 127 I make the piano sound active everytime but the pad sound active only when velocity is 90 or above. This way I can only activate the pad on the right hand when I press the key hard... I improved A LOT the usage of pad, it now sounds much better, but it still is not perfect...

That's why I would like to set a "timeout" for the pad when the sustain pedal is pressed, for example: the pad sound will only play for 3 seconds, never more... and if the pedal is not pressed, the sound (of course) will stop playing as soon as possible.


Do you have any experience or suggestion into this?
The administrator has disabled public write access.
  • Page:
  • 1
  • 2
Time to create page: 0.074 seconds
Cron Job Starts