Welcome, Guest
Username: Password: Remember me

TOPIC: Newbie Question

Newbie Question 8 months 1 week ago #1

  • Jim French
  • Jim French's Avatar
  • Offline
  • New Member
  • Posts: 2
Hi, I'm just beginning to play with polyphone and I'm sure this is a real "newbie" problem - but I am experimenting with creating a new soundfont and I have added samples, an instrument and a preset. I can play the sample just fine, but in the tree on the instrument and the preset no sound plays. The instrument shows a yellow dot on the assigned key number. can anyone point me in the right direction here? The examples I have loaded into ployphone work fine so I must be missing something. I've attached my test sf2. Thank you for your help!
Jim

This message has an attachment file.
Please log in or register to see it.

The administrator has disabled public write access.

Newbie Question 8 months 1 week ago #2

  • ziyametedemircan
  • ziyametedemircan's Avatar
  • Offline
  • Senior Member
  • Posts: 78
  • Thank you received: 20
I hear the sound. There is no sound problem.
suggestion: If the sample's sound is low, select sample (or samples) and use: Tools> Sample> "Change Volume" to Normalize to 96%(safest) or 98%(safe)..

1. It is necessary to set the original Root-key-number of the sound.
2. At least: it's better to enter a few digits to attack and release. (In order for the sound not to starting or stopping suddenly.)
3.And set the key range. In which range is this sample used? For example: (21-60) or for all (0-127)

This message has an attachment file.
Please log in or register to see it.

Last Edit: 8 months 1 week ago by ziyametedemircan. Reason: file added.
The administrator has disabled public write access.

Newbie Question 8 months 1 week ago #3

  • Jim French
  • Jim French's Avatar
  • Offline
  • New Member
  • Posts: 2
Wonderful! That did it - Thank you for the help!
The administrator has disabled public write access.
Time to create page: 0.058 seconds